Genius Tools offers a 190-Piece complete mechanic's tool set, No. MS-190TS. The compact set comes with 107 different types of sockets, six extension bars, 54 different wrenches, 11 nut and screw drivers, three hinge handles, three ratchets, five pliers and cutters and one hammer. All components of the set are available for individual tool replacement in the event a tool is lost. The tools come in plastic molded trays to easily notice any missing tools.
The Genius Tools 1/2” by 3/4" Dr. Torque Multiplier, No. 401500, can replace impact wrenches, pipe extensions and other insufficient and unsafe bolting methods. They are designed...
The Genius Tools 18-pc 3/4" and 1" Drive SAE Hex Bit Socket Set, No. BS-6818H, has a range of 9/16” to 1-3/8” and includes both 3/4” and 1” drive bit holders. These bits are designed...
The Genius Tools 6-pc Metric Double Flexible Socket Wrench Set, No. DF-506M, includes sizes between 8mm and 19mm and is packaged in a heavy duty canvas pouch for storage. The ...
Genius Tools' seven piece Small File Set, No. FL-0687, includes flat, round, half-round, square, triangle, trapezoid and warding files. These files can be used for general automotive...
Genius Tools now offers a 16-pc Air Micro Die Grinder Set, No. DG-1516. This set is designed for high-speed porting and finishing of small parts, and can be used on tight spots...
Genius Tools now offers a 6-pc. Air file set, No. AF-3406. This set includes an air file wrench with a free speed of 3,400 rpm and 90 psi air pressure. This set also comes with...
Genius Tools offers the 3-pc 3/8” and 1/2” Drive Interchangeable Torque Wrench, No. 1434N20. The torque range is 20-200Nm, and it has an accuracy of +/- 1 percent and a memory...
Genius Tools offers the Free Section Hand Riveter, No. SC-736. The riveter comes with four different nose pieces (3/32", 1/8", 5/32", 3/16") and 40 rivets. The head rotates 360...
Genius Tools offers the Retaining Ring Pliers in 9" and 12" sizes. Four different designs are offered in each size, including External and Internal Straight, as well as External...
Genius Tools now offers their Free Section Hand Riveter, No. SC-736. The riveter comes with four different nose pieces (3/32", 1/8", 5/32", 3/16") and 40 rivets. The head rotates...
The Genius Tools Master Tool Set, No. MS-926TS, is a 926-piece 1/4"-, 3/8"- and 1/2"-drive metric and SAE complete master tool set. It comes with almost every hand tool that a...
Genius Tools now offers a selection of Gear Pullers, available in two-jaw, three-jaw and two-arm styles. These pullers are made of chrome vanadium and can be used to quickly remove...
Genius Tools offers a selection of forged Retaining Ring Pliers. Four styles available: External-straight, internal-straight, external-90 degrees, internal-90 degrees. Lengths...
Genius Tools offers a 21-pc 3/4"-drive Deep Impact Socket Set in Both metric (No. DI-621M) and SAE (No. DI-621S) sizes. The metric sets range from 19mm to 50mm, and the SAE sets...
The Genius Tools Master Tool Set, No. MS-926TS, is a 926-piece 1/4"-, 3/8"- and 1/2"-drive metric and SAE complete master tool set. The tools are contained in blow-molded plastic...
Genius Tools' 11-piece Brake Piston Wind Back Set, No. AT-BC08, assists in the replacement of brake pads on most four-wheel disc brake vehicles. Tool and adapters position brake...
Genius Tools' 10-piece Disc Brake Caliper Tool Set, No. AT-08, uses a six-step process to install brake pads on vehicles with four-wheel disc brakes. The set works on most GM ...
Genius Tools' eight-piece Valve Spring Compressor Set, No. AT-09, features pantograph-type levers to ensure consistent coaxial contact with the valve. Set includes C-clamp, six...
Genius Tools' eight-piece Inner Tie Rod Tool Set, No. AT-4808, is specially designed for the inner tie rods that are inaccessible to adjust. The inner tie rod can be removed and...
Genius Tools' 14-piece Ball Joint Adapter Set, No. AT-0914, expands the capability of its No. AT-7209 Ball Joint Removal and Installation Set. Set includes all of the receiving...
Genius Tools' Seven-piece Ball Joint Removal and Installation Set, No. AT-7207, can remove and install press-fit upper and lower ball joints. The set comes with three receiving...
Genius Tools' 15-piece Belt Tensioning Wrench Set, No. AT-BW15, allows access to belt tensioners without removing engine or frame components. This set covers most autos that come...
Genius Tools offers the 12-piece set of locking pliers, No. CP-5312, that comes in a plastic molded tray. This set includes three curved jaw locking pliers with cutter (5", 7"...
