With over 8,000 tools in stock, OEMTOOLS offers a wide-range of specialty tools, shop supplies, and equipment for the automotive aftermarket. Meeting the professional’s exacting standards, OEMTOOLS provides innovative tools for better value and quality results.
OEMTOOLS is owned and operated by Great Neck Saw Manufacturing, Inc., one of the oldest, independently owned tool companies in America.
The OEMTOOLS Vortex Funnels are made in the USA and feature a vortex design that vents air to accelerate flow, delivering up to three times faster pours than standard funnels,...
The OEMTOOLS 2-1/2 Ton Aluminum/Steel Hybrid Floor Jack, No. 24869, features an aluminum construction and steel frame that provides the benefit of strength within a lightweight...
The OEMTOOLS 3-Ton Long/Low Profile Jack, No. 24868, has a lift height of 3-3/8" to 24-1/4" and is ideal for low-profile vehicles, trucks, and SUVs. The 4.3" saddle with jack ...
The OEMTOOLS 9-gallon Upright Portable Oil Drain, No. 87032, is designed for evacuating used oil from a vehicle. Users can position the 17" diameter funnel below the oil drain...
The 18-gallon Upright Portable Oil Drain, No. 87031, from OEMTOOLS allows users to evacuate used oil from a vehicle. Position the 18" diameter funnel below the oil drain plug,...
The OEMTOOLS 21-Gallon Oil Drain Vacuum and Extractor, No. 24862, is designed for the collection of used fluids including motor oil, transmission fluid, and coolant from under...
The 21-gallon Waste Oil Drain, No. 24861, from OEMTOOLS, is a portable, upright drain used for collecting fluids under lift-mounted vehicles. This drain features an adjustable...
The OEMTOOLS 20V MAX Li-ion Reciprocating Saw, No. 24491, uses a high-capacity 2.0Ah Li-ion slide battery for longer life and more power. Designed with an electric brake that ...
The OEMTOOLS 20V MAX Li-ion 1/2” Brushless Drill, No. 24484, is ready for a variety of applications — drilling holes, driving screws, and loosening or tightening a...
The OEMTOOLS Heavy Duty 1/2" MAX Li-ion Impact Wrench, No. 24481, is used for tightening or loosening nuts and bolts, automotive repair, body shop maintenance, and other applications...
The 10-pc Wheel Stud Pin Hanger Set, 32-Bin Metal Storage Cabinet, and Thread Reset Tool are some of this month's most popular tools and equipment among auto repair techs.
The 2-pc Pocket Pry Bars, 10mm Bypass Wrench, and Rechargeable LED Task Light are some of this month's most popular tools and equipment among auto repair techs.
The Clamp Probe Set, High Flow Air Blow Gun, and Hub Seal Puller Set are some of this month's most popular tools and equipment among auto repair techs.
The OEMTOOLS Pneumatic/Manual Fluid Extractor allows users to manually pump or use shop air to extract low-viscosity fluids through dipstick tubes or other openings.
The OEMTOOLS Pneumatic/Manual Fluid Extractor allows users to manually pump or use shop air to extract low-viscosity fluids through dipstick tubes or other openings.
Some popular products from this month's sneak peek include the Nitrous Key Making System, High Accuracy Low Current Clamp Meter, EV Battery Pack Leak Tester, and more.
Some popular products from this month's sneak peek include 6" Automatic Safety Wire Twisting Pliers, 17-pc Deep Metric Socket Set, Triple Square Bit Socket 10-pc Set, and more...
The OEMTOOLS Oxygen Sensor Socket Set, No. 37110, services hex vacuum switches and oxygen sensors. The set includes three sockets sizes for most applications: 3/8" Drive 7/8" ...
The OEMTOOLS Long Reach Harmonic Balancer/Pulley Installer, No. 37306 is used to install crank pulley or underdrive pulley on many late model Ford, GM, Dodge, and Chrysler vehicles...
The OEMTOOLS 8-pc Torque Limiting Extension and Thin Wall Socket Set, No. 24228, can help prevent over-tightening of wheel lug nuts and prevent breakage or damage on studs and...
The OEMTOOLS 7-pc Wheel Bearing Locknut Set, No. 37385 can be used to remove and install the wheel bearing locknuts found on many Dodge, Ford, and Toyota SUVs and trucks. The ...
OEMTOOLS 5-pc 1/2" Drive Flip Lug Nut Socket Set, No. 25555, is designed to remove warped and mangled chrome-cap lugs. Made from Cr-Mo and equipped with flip-design sockets that...
The OEMTOOLS 2-pc Hose Clamp Pliers, No. 25198, are designed to remove flat-typed hose clamps in hard-to-reach areas. This plier set includes flat band hose clamp pliers and angled...
The OEMTOOLS Budd Wheel Axle Nut Sockets, No. 37384, are designed to remove and install lug nuts from Budd wheels found on medium and heavy duty trucks, both import and domestic...
The OEMTOOLS 2-pc Tire Valve Core Tool Set, No. 22589, is designed to quickly remove Schrader valves from cars, trucks, motorcycles, bicycles, and more. The set includes two tools...
The OEMTOOLS Brake Caliper Piston Rewind Tool Set, No. 35058, is designed with a spring tension and built-in retainer plate to streamline installation into one smooth step. This...
The OEMTOOLS Pneumatic/Manual Fluid Extractor 1.5 Gallon (6L), No. 24937, allows users to manual pump or use shop air to extract low viscosity fluids through dipstick tubes or...
The OEMTOOLS Heavy Duty 19mm Crank Bolt Socket, No. 25290, is designed to easily break loose stubborn crank bolts. Constructed with heat-treated, durable chrome molybdenum steel...
