The Darex Work Sharp Wood Tool Sharpener, No. WS3000, is an air-cooled, dry sharpening system that uses maintenance-free 150mm tempered glass wheels. It offers a slotted, see-through wheel, and the precise and repeatable sharpening port allows 20-, 25-, 30- and 35-degree angle chisels and plane irons up to 2" wide to be sharpened. No jigs are needed, and lapping abrasive in the sharpening port increases burr removal and speeds sharpening. Bevel and skew geometry are not affected by wheel diameter, chisel size or complex user setup. Forced air-cooling and the sharpening port heat sink allow for higher material removal rates without affecting the steel temper. No re-calibration is required for changing wheel diameter or tool size.
