Ask the Expert: How can I prevent my air compressor from overheating?

May 1, 2019
While overheating can happen, there are some steps you can take to prevent common causes of overheating.

Q: How can I prevent my air compressor from overheating?

A: If compressed air is integral to your company’s daily operations, downtime can be catastrophic. If your air compressor overheats, it can stop working and need to be repaired or completely replaced. While overheating can happen, there are some steps you can take to prevent common causes of overheating.

Ambient Temperature 

The most common cause of an overheating compressor is the surrounding temperature and environment that it is in. Is your air compressor near windows in the middle of summer? Is it next to other very hot equipment? Is it in a non-insulated room that is very small? All of these are preventable issues to keep the surrounding environment at a lower temperature. Keep your compressor away from windows, especially in hot climates, and do not let your compressor sit next to other operational equipment that can become very hot. 

Oil Levels 

Another common cause of overheating is your compressor not having enough oil. Always regularly check the oil levels and change out your compressors oil on a regular basis. If you don’t add or change the oil, the oil can become varnished, causing too much friction, which can lead to overheating or a potential fire. 

Ventilation 

In addition to not only having a room large enough for your compressor to cool, you must make sure that the compressor is venting properly. If the air vents become clogged or are pushed up against a wall, the compressor will become overheated over time. Make sure during installation that your compressor is placed in a proper location and regularly clean the compressor’s air vents over time. 

Thermal Valve 

If a thermal valve starts to fail, overheating can occur. It is always advised to keep a spare thermal valve on hand in case of an emergency and to avoid any downtime for your business. The spare valve can also be used for comparison to see if your current valve is in good, working shape or if it needs to be replaced as a preventative maintenance measure.

Information provided by Chicago Pneumatics 

Sponsored Recommendations

Save Time with Standard's Kits & Multipacks

Stock up on essential repair kits! Discover how Standard's multipacks simplify repairs and reduce downtime.

Fuel Injection Training – Pro Tips for Techs

Choosing the right fuel injector matters. Learn best practices for selection and related component recommendations.

ABS Sensor Insights – Get the Right Fit Every Time

ABS sensors are critical to vehicle safety. Learn how they interact with electronic systems and how to choose the best replacement.

Prevent Oil Filter Housing Failures – What Every Tech Should Know

Learn why Pentastar oil filter housings commonly fail and how Standard's enhanced design prevents leaks.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!