FEATURES AND BENEFITS:
With the Trailer Buddy, one person can check a vehicle’s
trailer wiring harness in approximately 30 seconds. The tester will verify correct and incorrect
electrical functioning of the vehicle’s 4- or 5-pin flat trailer harness.
Unique to
the Trailer Buddy, the tester emits an audible signal, assigning a specific beep for each
lighting function. To test, the user activates each light (brakes, running, right turn, left
turn, reverse) and listens for the beep. This patent-pending system saves time, helps avoid
the need to walk back and forth for verification and does not require a second person.
ORIGIN
This idea came from the frequent need to check trailer wiring. Trailer
lighting failures are very common, and unique time-saving tools are always needed to track
down the cause. For example, when a trailer light doesn’t work, people automatically
assume the problem is in the trailer. However, many times the problem is in the tow vehicle.
For
technicians, Trailer Buddy offers a quick way to verify tow-vehicle wiring and new harness
installations. Once a vehicle has been newly wired, a quick test is needed to check one’s
work.
SELLING POINTS
This product is designed to save technicians time. Techs
can perform a complete trailer wiring test in about 30 seconds. No second person is required,
and no walking back and forth to verify.
• Each signal from vehicle emits a unique tone.
• Loud beep can be heard over shop noise.
• Just apply brakes, turn signals, running lights& engage reverse.
• Tester also emits unique tone for any shorts in the wiring.
• Tests left and right turn signals, brakes, running lights, reverse and wiring shorts.
CONTACT
Steve White
Electronic Specialties
800-227-1603
Email: [email protected]
Website: www.esitest.com
Suggested retail price: $27.95
