Some 2007-2018 Toyota Tundra trucks may exhibit a popping noise during right-hand or left-hand front door operation. This noise may be due to a fracture/crack in the plastic over-mold of the door check arm by the pivot area. Inspect the arm for signs of cracks/fractures etc. Also confirm the torque value of all three check arm mounting fasteners. If damage is found, replace the check arm. If no cracks are found and torque values are not within specification, correct the torque values and re-inspect. If the noise still exists, replace the check arm.
Verify torque value of bolt (1) is at 21 ft-lb, and nuts (2) is at 75 in-lb.
About the Author
Information courtesy of Mitchell 1
Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.
Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety ofspecialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.
