Service Repair

Ram Needs Fuel Pressure Sensor and Line Replacement

Dec. 21, 2020

This bulletin applies to 2019 Ram ProMaster City vehicles equipped with a 2.4L Multiair engine. The MIL may be on and you may find DTC P018C (fuel pressure sensor circuit low).

Information courtesy of Mitchell 1,

Mike Mavrigian

This bulletin applies to 2019 Ram ProMaster City vehicles equipped with a 2.4L Multiair engine. The MIL may be on and you may find DTC P018C (fuel pressure sensor circuit low).

This applies to vehicles built on or after Aug. 3, 2018, and on or before Aug. 13, 2018.

This may require replacement of the fuel pressure sensor and line.

The combination fuel pressure sensor and line is available as a single unit (sensor or line not available separately). The assembly is available as P/N 68338428AA.

Replacement time should be about a half hour.

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.