Tech Tip: Honda OBD II emissions monitor status readiness code checking using the instrument cluster
May 14, 2019
Using the instrument cluster malfunction indicator lamp (MIL) is a quick way to confirm all emissions monitors have passed or have yet to pass.
Autologic Diagnostics, Inc.
To begin readiness code checking with the malfunction indicator lamp (MIL), start with the ignition off. Then, turn the ignition on, while keeping the engine off. For the next step, view the next photo.
Honda vehicles can display OBD II emissions monitor status (complete or incomplete) using the instrument cluster malfunction indicator lamp (MIL).
This is a quick way to confirm all emissions monitors have passed or have yet to pass. Also referred to as complete or incomplete emissions monitors or readiness codes.
To learn how to check the Honda OBD II emissions monitor status using the instrument cluster MIL follow the step-by-step instructions in the photo gallery or watch the video.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!