Tech Tip: How to repair an Expedition with MIL and airbag lights on

Sept. 28, 2020
When the technician called ALLDATA Tech-Assist, he was advised that the airbag system on this vehicle uses the seat track position to determine the airbag ignition deployment force.

Vehicle: 2003 Ford Expedition, 4WD, V8-5.4L SOHC, VIN L

Mileage: 178,262

Problem: This vehicle was brought to the shop because the malfunction indicator light (MIL) and the airbag warning light were on.

Case Details: The technician connected a scan tool to check for diagnostic trouble codes (DTCs). He retrieved only one DTC:

  • C1981 – Seat track position sensor circuit fault

When the technician called ALLDATA Tech-Assist, he was advised that the airbag system on this vehicle uses the seat track position to determine the airbag ignition deployment force. If there is a seat track position error, the airbag system will show a fault. The consultant further advised that It would be best to begin the diagnosis by removing the seat to check for continuity between the sensors and connectors. While testing the circuits, the technician found an open wire between pin 23 of the restraints control module (in connector C313) and pin 2 of the seat position sensor, driver (in connector C356).

Confirmed Repair: The technician repaired the open wire, cleared the DTC, cycled the seat back and forth a few times and test drove the vehicle. The airbag light did not return.

Information provided by ALLDATA

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!