Bendix supports efforts of CVSA's Operation Safe Driver

Oct. 14, 2015
Bendix supports the efforts of the Commercial Vehicle Safety Alliance’s (CVSA) Operation Safe Driver, taking place Oct. 18-24, which aims to reduce the number of deaths resulting from crashes involving large trucks, buses, and passenger vehicles.

As the commercial vehicle industry continues to engineer safer equipment and develop more effective safety systems, Bendix Commercial Vehicle Systems LLC recognizes that the most advanced technologies must still be paired with the right support and training for skilled drivers practicing safe driving habits. Bendix supports the efforts of the Commercial Vehicle Safety Alliance’s (CVSA) Operation Safe Driver, taking place Oct. 18-24, which aims to reduce the number of deaths resulting from crashes involving large trucks, buses, and passenger vehicles.

During Operation Safe Driver, the CVSA, in partnership with the Federal Motor Carrier Safety Administration (FMCSA), promotes traffic law and safety belt enforcement, roadside inspections, regulatory compliance, and commercial driver education. The eight-year-old program also aims to educate all drivers about operating safely around commercial vehicles.

“Striving to improve highway safety goes beyond providing fleets and owner-operators with leading-edge safety and braking technologies,” said Fred Andersky, Bendix director of government and industry affairs. “The best commercial vehicle safety systems on the road are no substitute for well-trained, skilled, and alert drivers practicing safe driving habits behind the wheel.”

Bendix, the North American leader in the development and manufacture of leading-edge active safety and braking system technologies, stresses the importance of ongoing fleet and owner-operator support in maximizing highway safety. Andersky noted that Bendix safety technologies complement safe driving practices and are not intended to enable or encourage aggressive driving. Responsibility for the safe operation of the vehicle remains with the driver at all times.

According to the most recent FMCSA Large Truck and Bus Crash Facts report (2013), the number of large trucks and buses registered in the U.S. increased more than 97 percent between 1975 and 2013, climbing from 5.8 million to 11.5 million. Also, the number of passenger vehicles registered rose 104 percent in the same time period, increasing from 115 million to 236 million. These increases highlight the importance of all drivers exercising safe driving practices while on our nation’s highways, and are contributing factors for the ongoing advancement of vehicle safety technologies, both for light and heavy vehicles, to help mitigate crash situations. 

As the industry continues to adopt advanced safety technologies such as full stability, lane departure warning, collision mitigation, and Reduced Stopping Distance (RSD) foundation drum and disc brakes, Bendix has expanded and strengthened its programs to meet the growing need for knowledge and training. Hands-on training options include the Bendix Brake Training School; on-site demonstrations and detailed system explanations; on-site ride-and-drive training with customer vehicles; and on-site technician training covering troubleshooting and system maintenance. Bendix also regularly hosts track demonstrations where on-site training is impractical.

The three-day Bendix Brake Training School, one of the industry’s longest-running training programs, has educated more than 250,000 students since its inception. It takes a comprehensive approach to the full range of foundation and air brake system components, as well as providing in-depth coverage of advanced safety systems.

At www.brake-school.com, the Bendix On-Line Brake School serves more than 30,000 registered users from more than two dozen countries, and its free curriculum has become an essential part of training at many North American fleets. Available 24/7/365, Brake-School.com’s ever-growing course offerings cover all aspects of electronics and air brake maintenance, including lane departure warning systems, air compressors, tire pressure monitoring systems, wheel-end maintenance, and radar alignment for active safety systems.

“The manufacturers of today’s systems need to continuously bolster and share their expertise across the industry, because these technologies pave the way for tomorrow’s advances,” Andersky said. “The goals of Operation Safe Driver can be supported in large part by the development and improvement of systems and components that assist safe vehicle operation.

”For example, full-stability technology like the Bendix ESP Electronic Stability Program – which helps address both roll and directional instability through sensors that recognize and mitigate conditions that could lead to rollover and loss-of-control – serves as a foundation for other advanced and future safety technologies.

Bendix’s Wingman systems are in turn built on Bendix ESP: Bendix Wingman Advanced – A Collision Mitigation Technology combines both adaptive cruise control and collision mitigation to help drivers mitigate or reduce the intensity of potential rear-end collision situations. Bendix Wingman Fusion, launched this year, adds stationary vehicle braking, Bendix’s exclusive overspeed alert and action, and other capabilities to create a comprehensive driver assistance system.

Wheel-end safety solutions from Bendix that meet and exceed RSD standards for shorter stops include the higher-performing version of its Extended Service drum brake (Bendix ES brakes) and the Bendix ADB22X air disc brake. Both are produced by Bendix Spicer Foundation Brake LLC, a joint venture between Bendix Commercial Vehicle Systems LLC and Dana Commercial Vehicle Products, LLC.

By delivering on areas critical to fleets’ success – safety, vehicle performance, and efficiency – and providing unparalleled post-sales support, Bendix helps fleets and drivers strengthen return on investment in equipment and technology.   “All Bendix safety systems, whether they actively intervene, provide warnings, or improve stopping power, are ultimately designed to supplement safe driving practices,” Andersky said. “That’s why it’s crucial to ensure that we’re providing drivers with all the tools, knowledge, and experience possible to keep them on the road and operating safely, making the highways safer for them and everyone else sharing the road.”

Sponsored Recommendations

Tesla service, repair, and diagnostics

Keep update-to-date on how to maintain your customer's Tesla vehicles.

Tool Review: Ascot Supply 3/4" Drive 600 ft-lbs Split Beam Torque Wrench, No. 168-00600

Reviewed by Eric Moore, manager at DeMary Truck in Columbus, Ohio.

Diagnosing an engine misfire

Recognizing a misfire is the easy part; the challenge is determining its cause.

The ‘Iron Giant’

This technician spent two and half years putting together his ‘giant’ of a toolbox setup.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!