TSBs

Audi Misfire

Feb. 16, 2016

This bulletin applies to 2010 Audi R8 models. The MIL may be on, accompanied by a high engine speed misfire. DTC P0300 and/or P3001-P0310 may be stored in the ECM.

This bulletin applies to 2010 Audi R8 models. The MIL may be on, accompanied by a high engine speed misfire. DTC P0300 and/or P3001-P0310 may be stored in the ECM.

The cause is the software in the ECM. Audi suggests updating the software.

Model R8

Engine 5.2 V10 FSI

Old Software Part Number 420 910 552 F

Old Software Version (or lower) 0010

New Software Part Number 420 910 552 F

New Software Version (or higher) 0020

SVM Action Code 4201A006

Tip: After updating the programming of the ECM, it is not necessary to set the Readiness Code.

Continue Reading

Fuel trim analysis & MAF testing

Stones Fool YAW Sensor

Sponsored Recommendations

The Trainer #110: Battery Service Tips For Today’s Technician

The conventional flooded cell lead-acid battery has been around since the beginning of the automobile. But the demands of today's cars have given birth to new battery technologies...

Motor Age Tech Tips – Autel’s Remote Expert to the Rescue!

Join expert technician Scott Brown as he navigates a real-world ECM reprogramming challenge using Autel's innovative Remote Expert. This advanced tool delivers versatile support...

Motor Age Tech Tips – Mastering ADAS: Blueprinting Every Repair

Sponsored by Autel, this MotorAge Tech Tip provides service advisors, estimators, and technicians insight into how the Advance Driver Assistance Systems (ADAS) prevalent on today...

The Trainer #147: The Key to Efficient Drivability Diagnostics

The key to efficient drivability diagnostics is to make easy-to-perform analyses by limiting hands-on testing time under the hood and without disassembly. Join Motor Age Technical...