Checking Chevy Grille Shutter

Feb. 1, 2023

A 2016-2017 Chevy Colorado may have a MIL on with DTC P151E set. This condition may be caused by a poor connection at the X105 connector. The connector at the active grille air shutter motor must be checked for proper operation. Do not replace the active shutter until the electrical connection has been verified as good.

A 2016-2017 Chevy Colorado may have a MIL on with DTC P151E set. This condition may be caused by a poor connection at the X105 connector. The connector at the active grille air shutter motor must be checked for proper operation. Do not replace the active shutter until the electrical connection has been verified as good.

The connector X105 is located behind the left side of the fascia, attached to the tie bar. The fascia does not need to be removed for this procedure. 
|Photo Credit: Mitchell 1 

Turn the ignition off and allow time for the vehicle to power down (up to two minutes). Partially raise and support the vehicle. Turn the steering wheel fully to the right. Remove the fasteners in the front half of the left front wheel liner in the wheel well. Pull the wheel liner back and tuck it behind the left front wheel. Reach through the opening to the front lower left corner of the cooling module to locate connector X105. Disconnect the X105 connector for the active grille air shutter motor. Apply dielectric grease to the connector, connect the connector, reinstall the wheel liner and lower the vehicle. Verify that the DTC is no longer set.

This shows the lower fascia support removed for clarity of the connector location. 
|Photo Credit: Mitchell 1 

 

 

About the Author

Information courtesy of Mitchell 1

Information for Technical Service Bulletins comes from ProDemand, Mitchell 1's auto repair information software for domestic and import vehicles. Headquartered in San Diego, Mitchell 1 has provided quality repair information solutions to the automotive industry since 1918.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of  specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.

Sponsored Recommendations

Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!