The Fuel and Oil Casing/Canister Wrench Set, No. 23500, from Schley Products is designed to remove oil or diesel fuel filter canisters from any New Holland, Case IH combines and...
The Dodge 4500/5500 Ball Joint Install Adapter, No. 18100-D45, from Schley Products is designed to support the 18100 Ball Joint Press to install the ball joint. The adapter locks...
The 19300 Tire Valve Stem Wrench from Schley Products is designed for work on medium and heavy duty Class 7 and 8 trucks. According to Schley, the wrench was made with precise...
The M16 x 1.5mm CV Joint Driver Bit, No. 20200, from Schley Products is designed to aid in the removal of CV joints on various vehicles, such as Audi, BMW, and VW vehicles. The...
The 1-1/8" Spline Drive Hex Crowfoot Suspension Wrench, No. 20300, from Schley Products is designed to easily fit the tight area inside the airbag mounting bracket. The wrench...
The Heavy Duty On-Truck Pitman Arm Remover, No. 11880A, from Schley Products is engineered to remove pitman arms equipped on F450 and F550 trucks equipped with a ZF steering gear...
The 19880 Medium Duty Pitman Arm Popper from Schley Tools is designed to remove large pitman arms equipped on Isuzu and other medium duty trucks with the steering gear mounted...
The Schley Products Extension Protectors Deluxe Kit, No. 15950, is designed to protect any length 1/2" drive extension should it be otherwise used as a hammer drift. Different...
The Schley Products Extension Protectors Essential Kit, No. 15900, consists of two 1/2” square drive male and female hammers designed to connect to any length 1/2” drive extension...
The Schley Products Cup Kit For 2500/3500 GM Trucks, No. 18100-GM, is designed for 2000 to 2010 GM 2500 and 3500 pickup trucks equipped with steel lower A-arms. The kit includes...
An overview of the SP Tools 11015 Extender Arm for the 11000 Mobile Hydraulic Press Tool. This arm allows technicians to access suspensions components on the vehicle while on ...
SP Tools 11100 manual bushing R&R demo video. This video shows how quick and easy bushing replacement now is with the 11100. Cut considerable time on bushing replacement by not...
This tool allows technicians to press a wide range of bushings, ball joints, and wheel bearings out on the vehicle using our specially designed 18.2 tone ram. This tool is ideally...
Dennis Conway, a Matco Tools distributor in Rockwood, Mich., found a lot of exciting new tools at the Matco Tools show in San Diego, Calif. Interviewed by Elliot Maras, editor...
The Schley Products High Pressure Ball Joint Press, No. 18100, is designed to remove and reinstall most press-in type ball joints equipped on late model Ford and Dodge full-size...
The Schley Products Updated Low-Profile Pitman Arm Remover, No. 68800A, incorporates improvements that make it similar in design to Schley Product's larger 11880, which utilizes...
The Schley Products Ford Coyote Harmonic Damper Pulley Puller Kit, No. 18350, has been redeveloped to increase the versatility and range of engines and applications. In addition...
The Schley Products 2-Jaw Harmonic Balancer Pulley Puller, No. 17400, is designed for 4-spoke pulleys. The 17400 aids in the removal of the harmonic damper pulleys for various...
The Schley Products Master Harmonic Damper Pulley Puller Kit, No. 18000, accommodates applications including 2018 and later Ford Coyote engines, various models and production ...
The Schley Products 46mm Pitman Arm Torque Adapter, No. 18200, allows technicians to loosen and tighten the large 46mm sector shaft nut without having to remove various sub components...
The SP Tools Sprinter Injector Puller Kit, No. 17600, removes injectors from the 2.7L CDI engine. The kit enables technicians to take the top of the injector off easily with the...
The SP Tools Spring Style Hose Clamp Lock Set, No. 16200, is designed to help technicians save time when removing and servicing engine hoses that are fastened with spring style...
The SP Tools Duramax Injector Cup Puller, No. 16100, is designed to remove the injector cup and sleeve without causing damage to the cup on LB7 Duramax diesel engines for models...
The SP Tools Diesel Exhaust Bung Rethread Kit, No. 16000, is designed to repair EGT sensor bungs. These re-threaders offer a specific geometry that allows them to clean the threads...
The SP Tools Cummins Common Rail Injector Puller, No. 17200, is designed to remove diesel injectors from Dodge Cummins ISBE HPCR 5.9L and 6.7L engines produced from 2003 to current...
The SP Tools Sprinter Injector Puller, No.17600, removes injectors from the 2.7 CDI engine. Due to combustion leaks, corrosion, and wear, the injectors and valve cover may get...
