• BendPak Inc.

    Agoura Hills, CA 91301

    COMPANY OVERVIEW

    About BendPak Inc.

    Contact

    30440 Agoura Rd
    Agoura Hills, CA 91301
    United States of America
    http://www.bendpak.com
    805-933-9970
    800-253-2363

    More Info on BendPak Inc.

    Established in 1965, BendPak Inc. is an American-owned global manufacturer of vehicle service equipment and specialty consumer products sold under the trademarked brands BendPak, Ranger, Autostacker, QuickJack, Cool Boss, GrandPrix, JackPak, MaxJax, and Ergochair. Its collective range of products includes car lifts, parking lifts, EV battery lifts, pipe benders, air compressors, tire changers, wheel balancers, wheel aligners, brake lathes, evaporative air coolers, rolling work seats, and other equipment.

     

    Products & Press Releases

    Photo courtesy of BendPak
    bendpak_10ap
    Feb. 13, 2025
    The BendPak AP Series Two-Post Lifts feature rated lifting capacities ranging from 10,000 lbs to 20,000 lbs. Each AP Series lift uses Bendpak's Automatic Swing Arm Restraint System...
    untitled_design_11
    Feb. 12, 2025
    The AutoPucks from BendPak is a new line of rubber puck adapters and jack pads designed to provide a secure connection and greater protection when picking up Corvettes, Tesla ...
    Photo courtesy of BendPak
    bpak
    Jan. 30, 2025
    The BendPak 12AP-SRT Short Two-Post Lift features the company's Automatic Swing Arm Restraint System, which uses a forged-steel design to provide over 2,000 lbs of load-holding...
    Photo courtesy of BendPak
    bendpak_column_lift_2
    Jan. 8, 2025
    The BendPak PL-6000DCX Two-Post Parking Lift, No. 5175625, fits in a typical 8" parking space and accommodates two vehicles. Each lift features a rated capacity of 6,000 lbs, ...
    Photo courtesy of BendPak
    maxjax
    Nov. 22, 2024
    The BendPak MaxJax Reclining Creeper Seat, No. 5160119, features a gas spring-supported backrest that can seamlessly adjust from 0 degrees to 70 degrees in 10-degree increments...
    Photo courtesy of Bendpak
    ergoscoot
    Oct. 22, 2024
    The Ergochair ERGO-SCOOT, No. 5160118, from BendPak, features adjustable risers that allow it to convert from a low-profile creeper to a rolling work seat. Its wide-diameter wheels...
    Photo courtesy of Bendpak
    ergo_jet
    Oct. 21, 2024
    The BendPak Ergochair ERGO-JET, No. 5160112, features TPR wheels that provide shock absorption, cushioning, floor protection, and quiet rolling. The wheels are also resistant ...
    Photo courtesy of BendPak
    bendpak_octo
    Oct. 15, 2024
    The BendPak Octa-Flex Series offers the functionality of a traditional two-post lift with the added versatility of a second set of powered assist arms for lifting and maneuvering...
    Photo courtesy of BendPak
    bendpak_lifts
    Oct. 10, 2024
    The 16AP and 20AP Series Two-Post Lifts from BendPak feature multi-faced columns for more evenly distributed loads compared to traditional columns and an automatic...
    Photo courtesy of BendPak
    evs3000
    Aug. 21, 2024
    The BendPak Mobi-EVS3000, No. 5175611, features a lift capacity of 3,000 lbs and is ideal for electric vehicle service and EV battery pack replacement. The lift table offers...

    Articles & News

    Ranger Select from BendPak
    April 4, 2025
    The service program is designed to deliver professional installation and training for wheel service equipment.
    Photo courtesy of Bendpak
    Bendpak vehicle lift
    Emily Markham
    March 11, 2025
    A Q&A with ALI President R.W. “Bob” O’Gorman, BendPak Director of New Product Development Sean Price, and Challenger Lifts Sales National Manager for North America, Trevor Colman...
    ID 171715582 © Oksix | Dreamstime.com
    Vehicle Lift
    March 7, 2025
    A breakdown of the seven types of lifts to help you figure out what lift/s will work best in your shop.
    untitled_design_12
    Feb. 12, 2025
    The AutoPucks are available in three models: Universal Slotted AutoPucks, Corvette AutoPucks, and Tesla AutoPucks.
    Photo courtesy of BendPak
    bendpak_12apsrt_in_tire_shop
    Jan. 30, 2025
    The 12AP-SRT can raise 99 percent of cars, trucks, and SUVs to a height of 47".
    add_a_subheading
    Jan. 16, 2025
    Three new faces join the BendPak management team: David Reunert, Sean Price, and Tyler Rex.
    Photo courtesy of BendPak
    a black and yellow vehicle lifts holds a white SUV below a red sports car on a lift platform
    Jan. 9, 2025
    BendPak's PL-6000DCX expands on its previous PL-6000DC parking lift with a wider platform.
    Photo courtesy of BendPak
    bendpak_groundbreaking_main_image
    Sept. 24, 2024
    The first phase of construction will last until the third quarter of 2025.
    ru__20240904t132253
    Sept. 4, 2024
    Jeffrey Carson brings much experience in territory and regional sales management to his new role with BendPak.
    Photo courtesy of MaxJax
    Aug. 9, 2024
    MaxJax, which was acquired by BendPak in 2020, is expanding its warranty and coverage for its two-post lifts.

    Videos & Resources

    Toolbox Topics Bendpak
    Emily Markham
    April 11, 2025
    In this video, PTEN editor Emily Markham speaks with BendPak Director of Product Development Sean Price about the dangers of non-ALI-certified vehicle lifts, some of BendPak...
    BendPak Octa-Flex EV12DPS Two-Post Lift: First Look
    Jan. 22, 2024
    BendPak introduces its Octa-Flex EV12DPS Two-Post Lift which is designed to handle both regular and electric vehicles.
    BendPak Mobi-EVS4500 Battery Pack and Powertrain Lift
    Dec. 27, 2023
    In this video, BendPak demonstrates its Mobi-EVS4500 Battery Pack and Powertrain Lift. 
    Maxresdefault 64bfcdc7f129b
    July 25, 2023
    In this video, Cool Boss introduces its Tempest and Windstorm Series HVLS Industrial Ceiling Fans.
    Maxresdefault 64b69df494406
    July 18, 2023
    In this video, Cool Boss introduces its all-in-one portable air cooler, Coolee CL-240.
    Maxresdefault 64b57aaf7196f
    July 17, 2023
    In this video, BendPak demonstrates its PL-12000 Series Multi-Platform Parking Lifts.
    Maxresdefault 63e2804a626e7
    Feb. 7, 2023
    In this video, BendPak demonstrates its Ergochair Ergo-RS.
    Maxresdefault 6386784b9e9e0
    Nov. 29, 2022
    In this video, BendPak introduces their AP Series lifts.
    R76LT Tire Changer
    Aug. 19, 2022
    In this video, BendPak shows how to set up the R76LT Tire Changer
    Hqdefault 62f3ce1195dbe
    Aug. 10, 2022
    In this video, BendPak introduces its latest Cool Boss Portable Evaporative Air Coolers Line.

    Request More Information

    By clicking above, I agree to Endeavor Business Media's Terms of Service and consent to receive promotional communications from Endeavor, its affiliates, and partners per its Privacy Notice. I also understand my personal information will be shared with the sponsor of this content, who may contact me about their offerings per their privacy policy. I can unsubscribe anytime.

    All content from BendPak Inc.

    Photo courtesy of BendPak
    evs4500
    Aug. 20, 2024
    The BendPak Mobi-EVS4500, No. 5175613, is a battery-powered mobile scissor lift table ideal for electric vehicle service and battery pack replacement. The tabletop is made of ...
    ru_82
    Aug. 20, 2024
    The Cool Boss CB-16 Portable Evaporative Cooler from BendPak uses evaporation to reduce surrounding air temperature by up to 26 degrees. The portable CB-16 is easy to move...
    July 3, 2024
    The BendPak 12APX-192 is a lift designed to ease technicians' workloads. With a height of 193" and a 12,000-lb lifting capacity, it offers increased space and power. Part of BendPak...
    Photo courtesy of Bendpak
    June 6, 2024
    The BendPak 12APX Series of high-rise two-post lifts can handle a wide range of vehicles weighing up to 12,000 lbs. With a max rise of over 82", they provide plenty of working...
    Photo courtesy of Bendpak
    June 5, 2024
    The Bendpak Ergochair ERGO-GLIDE, No. 5160120, features a thick-cushioned work seat that's resistant to abrasion, chemicals, and oils. The ERGO-GLIDE glides easily around the ...
    Photo courtesy of Cool Boss
    May 8, 2024
    The Cool Boss CB-28HV Desert Storm Series is the most powerful model of evaporative cooler in the Cool Boss line, states the company, and it comes equipped with a 28" axial-flow...
    Photo from Bendpak
    April 25, 2024
    The LITESTIX, No. LS36SMDX, from Bendpak is a portable LED worklight that provides up to seven hours of continuous use on one charge. The light features a 2,600 mAh rechargeable...
    Photo from BendPak
    March 29, 2024
    Don Henthorn introduced the company's first four-post lift in 1983.
    Photo from Bendpak
    Full-Rise Scissor Lift, No. SP7XE
    Feb. 28, 2024
    The BendPak Full-Rise Scissor Lift, No. SP7XE, provides the performance and undercarriage access of traditional two-post lifts in a more compact, space-saving package. The lift...
    Photo courtesy of Cool Boss
    CB-26 Portable Evaporative Cooler
    Dec. 19, 2023
    The Cool Boss CB-26 Portable Evaporative Cooler is built to rapidly and economically cool areas up to 3,055 sq. ft. The eco-friendly evaporative cooler allows users to direct ...
    Photo courtesy of BendPak
    BendPak PL-6000DC Two-Post Parking Lift
    Dec. 1, 2023
    The BendPak PL-6000DC Two-Post Parking Lift is designed to be ganged together with shared columns so more lifts can fit in a smaller area, indoors or outside. With a rated capacity...
    Photo courtesy of Cool Boss
    Coolee CL-240 by Cool Boss
    Sept. 11, 2023
    A three-in-one portable air cooler designed to keep individuals cool and comfortable.
    Photo courtesy of Cool Boss
    Coolee CL-240 by Cool Boss
    Sept. 7, 2023
    A three-in-one portable air cooler designed to keep individuals cool and comfortable.
    Photo courtesy of Cool Boxx
    CB-28 and CB-36 Portable Evaporative Air Coolers from Cool Boss
    Aug. 16, 2023
    The CB-28 and CB-36 Portable Evaporative Air Coolers from Cool Boss can drop the air temperature up to 26 degrees F using up to 70 percent less energy than conventional air conditioning...
    Photo from Cool Boss
    Cool Boss Tempest and Windstorm Series HVLS Industrial Ceiling Fans
    July 25, 2023
    The Cool Boss Tempest and Windstorm Series HVLS Industrial Ceiling Fans are designed to deliver optimized temperatures and air circulation in large interior spaces while reducing...
    Photo courtesy of BendPak
    BendPak Industrial Complex
    July 18, 2023
    The new complex is set to feature several large multi-use buildings that will provide an optimal environment for light manufacturing and assembly, product development and testing...
    Photo 194172408 © Albertshakirov | Dreamstime.com
    scan tool
    Emily Markham
    July 10, 2023
    Is your shop looking to upgrade its diagnostic tools and equipment? Check out the most clicked-on diagnostic tools on VehicleServicePros.com from the second quarter.
    Sneak Peek June 2023
    Some popular products from this month's sneak peek include the Rechargeable Neck Work Light, Cleaning Borescope, 3-Position Adjustable Butane Torch, and more.
    Photo from BendPak
    BendPak unveils new headquarters
    June 14, 2023
    BendPak's new global headquarters will help the company support its growing operations and expand its workforces.
    Photo courtesy of BendPak
    Ranger TruSensor TS58R Universal TPMS Kit
    May 10, 2023
    The Ranger TruSensor TS58R Universal TPMS Kit is designed to diagnose and program import and domestic tire pressure monitoring systems. Offering 98 percent global vehicle coverage...
    Bendpak Mobi-EVS EV4000SL EV Battery and Powertrain Lift Table
    Pete Gruber
    May 5, 2023
    Reviewed by Pete Gruber, owner of Gruber Motor Company in Phoenix, Arizona.
    Cool Boss COOLBREEZE CB-12 and CB-14 Portable Evaporative Air Coolers
    May 2, 2023
    The Cool Boss COOLBREEZE CB-12 and CB-14 Portable Evaporative Air Coolers are the smallest units in the Cool Boss lineup. Both units operate on 110V power and feature three-speed...
    Genesis Equipment Team
    April 19, 2023
    Leading workshop fitment supplier adds Cool Boss portable evaporative coolers to lineup .
    BendPak Ergochair Ergo-RS
    April 7, 2023
    Provides technicians the opportunity to work comfortably while underneath a vehicle or other heavy equipment.
    BendPak Ergochair Ergo-RS
    April 6, 2023
    Provides technicians the opportunity to work comfortably while underneath a vehicle or other heavy equipment.
    2023 March Sneak Peek
    Some popular products from this month's sneak peek include the X-431 Torque 5, the Extended Back Probe Spoons, the LED Penlight, and more.
    BendPak Mobi-EVS EV4000SL EV Battery and Powertrain Lift Table
    Emily Markham
    March 7, 2023
    With the prominence of EVs on the rise, lift manufacturers have been modifying and creating new shop equipment to meet the industry’s needs.
    Gary Henthorn
    March 2, 2023
    Son of BendPak founders established Dannmar, MaxJax, and Garage Equipment Supply.
    February Most Wanted Tools 2023
    The Volt Tester, Ergochair, and Super Relay Buddy are some of the popular tools and equipment among auto repair techs.
    Upgraded EV2400SL EV Battery Pack and Powertrain Lifting System
    Feb. 1, 2023
    The BendPak EV2400SL EV Battery Pack and Powertrain Lifting System has recently been upgraded and now part of the company's Mobi-EVS lineup. The EV2400SL retains its 2,400 lb ...
    BendPak Mobi-EVS EV Battery and Powertrain Lift Table, No. EV4000SL
    Jan. 31, 2023
    The BendPak Mobi-EVS EV4000SL EV Battery and Powertrain Lift Table is a push-around full-rise scissor lift table that is ideal for EV service and battery pack replacement. The...
    Most Wanted Tools December 2022
    The Wing Mount/Demount Head, Adjustable Brake Caliper Tool, and TechRITEPro are some of the popular items among auto repair techs.
    Bendpak AP Series Two-Post Lifts
    Nov. 29, 2022
    The BendPak 10AP Series Two-Post Lifts are designed to make lifting ICE and electric vehicles safer, easier, and more efficient. The patent-pending arm design offers maximum extension...
    EVT Scissor Lift REV-1 Handle
    Aug. 10, 2022
    A mobile full-rise scissor lift table designed to help technicians safely and efficiently remove, service, and install heavy battery packs from electric vehicles
    EVT Scissor Lift REV-1 Handle
    Aug. 3, 2022
    A mobile full-rise scissor lift table designed to help technicians safely and efficiently remove, service, and install heavy battery packs from electric vehicles
    Cool Boss Portable Evaporative Air Coolers Line
    Aug. 2, 2022
    The Cool Boss Portable Evaporative Air Coolers Line from BendPak includes seven energy-efficient models designed to cost-effectively keep workers cool and safe from heat-related...
    BendPak QuickJack 6000ELX
    July 12, 2022
    The BendPak QuickJack 6000ELX is a portable car lift that is able to lift EVs for maintenance, service, and detailing. The 6000ELX is a compact, frame-engaging scissor lift with...
    Maxresdefault 62c5dbafb03ae
    July 6, 2022
    In this video, BendPak demonstrates its EV2400SL EV Battery Pack and Powertrain Lifting System, a push-around full-rise scissor lift table that is suited for EV battery pack replacement...
    BendPak EV2400SL
    June 9, 2022
    The Bendpak EV2400SL EV Battery Pack and Powertrain Lifting System is a compact, mobile, full-rise scissor lift table designed to make removing, servicing, and installing EV battery...
    Quick Jack Tl Series
    Nov. 3, 2021
    The QuickJack TL Portable Car Lift Series from BendPak features four compact, frame-engaging models with an open-center design for complete access to the vehicle’s undercarriage...
    Litestix
    Oct. 19, 2021
    The BendPak LITESTIX is a bright, versatile LED worklight powered by a rechargeable lithium battery to offer complete portability. It uses dual 90-degree swivel handles equipped...
    New Tools Dreamstime
    Amanda Silliker
    July 16, 2021
    PTEN editors pick their favorite tools and equipment that crossed their desks this week.
    Ranger Motocycle Lift
    July 12, 2021
    The Ranger RML-1500XL Motorcycle Lift is designed to help technicians complete motorcycle maintenance and repair more efficiently.
    Jack Stand Yellow Raisers
    March 22, 2021
    It may seem like a hassle to manually jack up the vehicle and spend the time getting the jack stands lined up just right so they support the vehicle, but this method is safe and...
    File 2263975894 5cae1a2436235
    A facility’s physical characteristics play a big part in lift purchases.
    Dannmar Mb 240 X Balancer
    Feb. 18, 2021
    The Dannmar MB-240X Manual Wheel Balancer from Bendpak is ideal for small shops requiring precision wheel balancing at a fraction of the cost, the company says. The balancer is...
    6 Floor Jack In Use
    Feb. 1, 2021
    Like all equipment, floor jacks should be inspected regularly for damage and kept clean.
    Rl8500 G&y Brake Lathe Shelf
    Jan. 20, 2021
    The Ranger RL-8500 Combination Brake Lathe uses independent DC servo motors to control the cross-feed and spindle feed drives, allowing for a precision cut every time and eliminating...
    5 Transmission Jack In Use Hi Res
    Jan. 4, 2021
    Transmission jacks can only do their jobs if they are properly maintained, regularly inspected for damage, and used correctly.
    4 Brake Lathe Closeup
    Dec. 1, 2020
    To keep your brake lathe running smoothly, follow these ten daily tips.