Bosch introduces HD smoke machine bladder adapters to help locate leaks in exhaust, intake and turbocharging
The bladders are used with the HPT 500 High-Pressure Diagnostic Leak Tester, offering high-pressure diagnostic leak detection for heavy-duty vehicles and turbocharged passenger cars. HPT 500 provides a solution for HD vehicle diagnosis and repair by producing a larger volume of smoke necessary for these larger systems. The machine delivers leak detection smoke at up to 20 psi, producing higher pressures than standard machines and simulates truck boost to safely test with the engine off. The newly available adapters are: - 169500006 1.5-inch adapter - 169500007 1.9-inch adapter - 169500008 2.9-inch adapter - 169500009 3.9-inch adapter - 169500010 5.9-inch adapter
The HPT 500 is capable of testing an entire system in 15 minutes, and can help technicians diagnose leaks faster in exhaust after-treatment systems in medium- and heavy-duty vehicles.
With dual operating modes, technicians can alternate between smoke-only and air-only cycles to confirm repairs. The machine also features a flow control valve, remote shut off, a flow rate gauge and system pressure and test pressure gauges. A low operating cost per test makes HPT 500 a valuable investment for fleet owners and shops that service HD trucks.
The bladder adapters are available now through Bosch’s distribution partners.
For more information on the HPT 500 bladder adapters or the HPT 500 High Pressure Leak Tester and other Bosch diagnostic tools visit www.BoschDiagnostics.com.