In Focus: AIRCAT 1/4” Mini Ratchet

Sept. 3, 2015
This ratchet provides 30 ft-lbs of maximum torque and a free run-down speed of 280 rpm.

The AIRCAT 1/4” Mini Ratchet, No. 804, has a transmission gear that increases the rate of torque build-up. The single-piece alloy steel constructed handle and ratchet head eliminates loosening and misalignment of the ratchet head, motor and internal parts. The tool provides 30 ft/lbs of maximum torque and a free run-down speed of 280 rpm. Weighing 1.55 lbs, the ratchet has an ergonomic over mold grip to protect the tool and provide comfort. The rapid response variable speed trigger allows better control, and internal silencing provides quiet operation at 84 dBA.

Application

The AIRCAT 1/4” Mini Ratchet, No. 804, is designed for removal and tightening of bolts/fasteners up to 3/8”. It can be used across the vehicle, with fasteners located in sometimes hard-to-reach areas.

Selling points

The 804 features a unique single piece alloy steel constructed handle/ratchet head designed to dramatically increase reliability. This feature serves to eliminate “loosening” and consequential mislignment of the ratchet head, motor and internal parts.

The 804 has 30 ft/lbs of torque at 280 rpm for a fast rundown. It is covered in a composite, over-mold grip for comfort. Its ratchet cover eliminates contamination of the ratchet mechanism, which is also meant to increase reliability.

Features and benefits 

  • The 804 offers significant torque, and its size allows a technician to reach tight areas.
  • At 280 rpm, the 804 is very fast with a uniquely designed transmission gear that increases the rate of torque build-up.
  • The variable speed trigger and composite over-mold grip is designed to offer technician control and comfort.
  • At 84 dba, the 804 is a quiet ratchet. 

Origin

The AIRCAT 1/4” Mini Ratchet, No. 804, was designed for three reasons that address the main issues of ratchets.

  • The single piece housing eliminates slippage of the ratchet.
  • It eliminates the misalignment of internal parts.
  • Its unique design increases torque build-up.

Manufacturing specs

The 804 is made out of single-piece alloy steel. It weighs 1.55 lbs and is 7.15” in length. It has 30 ft/lbs of torque and a speed of 280 rpm.

Storage and display

The AIRCAT 1/4” Mini Ratchet, No. 804, is shipped in a single box with a user manual and parts breakdown sheet. There are many options to display the 804 Mini Ratchet. Since it takes up little space, it can be fitted on a coupler and hung from the ceiling, on a shelf or mounted on its side on a wall. 

Suggested retail price

$245

For more information

Tony Le Neveu

VP of Engineering & Sales

AIRCAT Tools

Florida Pneumatic Manufacturing Corp.

[email protected]

561-744-9500

Sponsored Recommendations

Tesla service, repair, and diagnostics

Keep update-to-date on how to maintain your customer's Tesla vehicles.

Tool Review: Ascot Supply 3/4" Drive 600 ft-lbs Split Beam Torque Wrench, No. 168-00600

Reviewed by Eric Moore, manager at DeMary Truck in Columbus, Ohio.

Diagnosing an engine misfire

Recognizing a misfire is the easy part; the challenge is determining its cause.

The ‘Iron Giant’

This technician spent two and half years putting together his ‘giant’ of a toolbox setup.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!