LTI Tools by Milton

The Lock Technology Shockit Punch Kit, No. LT1910PK, is air hammer powered and features an offset design for greater access. The kit includes a 5.5" Short Punch, No. LT1910PS;...

The Lock Technology 12-pc Metric Shockit Line Wrench Set, No. LT1930, is designed to loosen fittings on steering, brake, AC, and fuel systems. It uses the force and vibration ...

The Lock Technology 13-pc SAE Shockit Line Wrench Set, No. LT1920, is designed to loosen fittings on steering, brake, AC, and fuel systems. Uses the force and vibration of an ...

The Lock Technology 10-pc Shockit Crows Foot Sets, Nos. LT1900 and LT1910, are designed to loosen hydraulic fittings on tractors, forklifts, and heavy equipment. The sets use ...

The Lock Technology LT1900 Series Shockit Crows Foot and Line Wrenches Sets offer a quick method for fastener access and removal. Air hammer hyper sonic vibration is delivered...

The Lock Technology 1/2" Kentucky Kicker Shockit Driver Kit, No. LT1940-1/2, is air hammer powered. Simply apply air hammer vibration and torque to any impact socket. By repetitive...

_

The Lock Technology 10-pc SAE Shockit Crows Foot Set, No. LT1900, is designed to loosen hydraulic fittings on tractors, forklifts, and heavy equipment. The set uses the force ...

The Lock Technology Shockit Socket O2 Sensor Removal Kit, No. LT994, is designed to easily remove O2 sensors when ratchets, wrenches, and sockets don't fit. Use air hammer power...

The Lock Technology 17-pc Foreign And Domestic Brake Caliper Socket Kit, No. LT4996, is designed to work on most foreign and domestic vehicle brake caliper applications by featuring...

The Lock Technology 2-pc Skinny Rod Lock Out Kit, No. LT-128, features a serrated tip edge for maximum gripping power. To achieve maximum strength and rigidity, the angled bend...

The Lock Technology SAE Thread Chaser Socket Kit, No. LT999, is designed to recondition threads on SAE high pressure male/female fittings. The hollow end tap slides over flared...

The Lock Technology Texas Twister Dedicated Single Rod Universal Seal/Bearing Puller, No. LT856, features a 27", one-piece design for maximum strength and power. It is made from...

Convert an air hammer into a pneumatic slide hammer with the Texas Twister Air Hammer Pulling Kit, No. LT855A, from Lock Technology. Simply snap the Texas Twister curved air bit...

The Lock Technology Texas Twister Bidirectional Air Hammer Starter Kit, No. LT855-AH-SK, allows technicians to convert their air hammer into a pneumatic slide hammer by installing...

The Lock Technology LT855-AH-SK Texas Twister Air Hammer can be used as a hammer or a puller. It is a double-duty air hammer. The LT855-AH can be used with the LT855A Texas Twister...

The Lock Technology German Vehicle Brake Caliper Socket and Bit Set, No. LT4995, works on all German vehicle brake caliper applications including Audi, BMW, Volkswagen, Mercedes...

The LTI Tools German Vehicle Rotating Ring Lug Nut Removal Kit, No. LT4569, is designed to easily remove the rotating ring lug nut locks on Audi, BMW, Mercedes Benz, Porsche and...

The Lock Technology Texas Twister, No. LT855, allows technicians to convert their air hammer into a pneumatic slide hammer. Its curved air bit snaps into the collet of the air...

The Lock Technology Lug Ripper II removes seized or frozen lug nuts off of the rim of a vehicle in 11 minutes or less, without damaging the tire rim of a vehicle, according to...

The Lock Technology Brake Re-threading Kit, No. LT993, offers male/female combo sockets with a compact design. The kit allows the user to re-thread damaged ABS control module ...

The Lock Technology VW/Audi Wheel Lock Bolt Kits, Nos. LT4150 and LT4155, are an alternative to factory-produced kits, utilizing the same factory part numbers to replace the originals...

The Lock Technology Universal Hub Shocker, No. LT830A, safely removes all frozen wheel bearing hub assemblies. The universal fit mounts to all axle bolted hubs, including five...

With 117 product entries, top products in 26 categories have been recognized.

The Lock Technology Wheel Weight Hammer, No. LT845, is the only hammer with a second spring-loaded hammer inside the hammer's handle, according to the company. This allows technicians...

The Lock Technology Truck Brake Spring Tool, No. LT890, can be operated safely with one hand. The device connects to rear drum brake return springs. The slotted ends on the tool...

The Lock Technology Universal Hub Shocker, No. LT830, removes frozen hubs instantly by striking the 2” square metal tube with a heavy hammer. The Hub Shocker is a universal fit...

The Lock Technology LT598 ShockIt Socket Set includes very low-profile sockets to fit over frozen nuts and bolts. The sockets have a raised flat edge. Included is a custom offset...

The votes are in and the results have been announced! Beginning on page 24, the PTEN Innovation Awards recognize the most innovative products introduced in the last year to the...

Frequently techs experience great difficulty removing frozen studs and bolts during strut, break hub, front end, exhaust, spring and suspension repair.The Lock Technology LT1800...

Lock Technology's LT465 12mm and 14mm Wheel Hanger Guides slide into wheel lugnut holes without using threads saving the technician time, because they involve no turning the wheel...

Lock Technology's LT991 Hollow End Line Taps help rethread female fittings without line removal in order to make it easier to service A/C and hydraulic line fitting threads that...

Lock Technology's dual-sided universal oil cap removal tool, No. LT-265, helps removed seized plastic oil caps. Oil caps on Toyota, Nissan, Hyundai and many imported manufacturers...

The LT-250 eliminates water buckets and hoses when wet sanding vehicles at your body shop. Utilizes 25 feet of plastic hose and has its own water regulator valve to control water...

Fits GM, Ford, Chrysler and most foreign cars. This tool instantly reforms damaged lock openings to their original contours.

The Lock Technology Auto Groundskeeper, No. LT-525, provides a good ground for test light and multimeter diagnostic use. Especially useful in the auto industry where testing is...

The Universal Half-Shaft Removal Tool (UHRT), No. LT-836, has two UHRT sockets for removing inner half-shafts on front wheel drive cars. The first socket (LT-836-900) is for all...

The Magnetic Nut Holder, LT-230, has a flexible stainless steel body with pivoting magnetic head to reduce the risk of losing hard to reach nuts. Clips onto open and box end wrenches...

Convert your 3/8" and 1/4" air ratchet to an angle head drill. Kit includes both the 3/8" (LT-205) and the 1/4" (LT-210) Jacobs Chucks, chuck key (LT-215) and a cordless screwdriver...

Removes most GM, Foreign and other domestic radiator drain plugs from plastic radiators. The LT-720 radiator drain plug remover easily does the job and can be used with a 1/4"...

Quickly starts most 1978-'91 GM vehicles.

Starts W body ignitions 1987-'93 (Lumina, Grand Prix, Regal and Cutlass Supreme) and L Body ignitions, 1987-'96 for the Beretta and Corsica, without doing any damage to the vehicle...

This tool will start Ford 10-cut key vehicles, (1984 1/2-'96 cars, trucks and vans) without damage to the vehicle or its steering column. The LT-78 also allows you to change the...

A complete pick set containing 17 picks, including the LT-300, LT-310, LT-320, as well as the LT-330-tension wrench and 106-gas cap pick tool packaged in a custom leatherette ...

A complete master pick set containing 23 picks, including the LT-290, LT-300, LT-310, LT-320, as well as the LT-330-tension wrench and the 106-gas cap pick tool packaged in a ...

The 6 piece set is designed for foreign wafer locks found in most Japanese and European vehicles. Includes Harpoon pick to remove broken keys from auto locks. Not for use on transponder...

The 6 piece pick set will open door and trunk locks and start Chrysler vehicles from 1969-'99, including tilt columns. Not for use with the Smart Key anti-theft ignition systems...

A 5 piece pick set opens door and trunk locks of Ford, Lincoln and Mercury cars, vans and trucks for model years 1969-'99. To start ignitions with 10-cut locks (1984 1/2-'96) ...

A six piece set of rocker picks designed for European and Japanese vehicles. Not for use on transponder based anti-theft ignition systems.

Shines where other lights can't! Flexible wire holds the shape you give it. Focused high intensity bulb (only 1/4" in diameter) fits in the tight spots. Batteries not included...