Certain Toyota engines are equipped with a plastic oil filter cap assembly which can be damaged if the proper procedure is not followed. This applies to 2007-2010 Tundra and 2008-2010 Sequoia vehicles equipped with the 1UR-FE or 3UR-FE engine, 2009-2010 Corolla and Matrix with the 2ZR-FE, 2009 Highlander and Venza with the 1AR-FE and 20010 Camry and RAV4 with the 2AR-FE engine.
Certain Toyota engines are equipped with a plastic oil filter cap assembly which can be damaged if the proper procedure is not followed. This applies to 2007-2010 Tundra and 2008-2010 Sequoia vehicles equipped with the 1UR-FE or 3UR-FE engine, 2009-2010 Corolla and Matrix with the 2ZR-FE, 2009 Highlander and Venza with the 1AR-FE and 20010 Camry and RAV4 with the 2AR-FE engine.
Toyota recommends using oil filter wrench P/N 09228-06500-02 or 09228-06501.
Confirm that the SST is fully seated on the oil filter cap when removing/installing. When installing, torque the cap to 18 +/- 3.7 ft.-lbf. The oil filter cap may be difficult to remove if the specified torque is exceeded.
Learn how electronic parking brake actuators have replaced manual systems and now play a key role in advanced safety features like automatic emergency braking. This WIYB Training...
Not all fuel injectors are created equal. In this WIYB Training Series, we compare Standard® Fuel Injectors against OE, low-cost imports. See why precision engineering and rigorous...
Carrying active OEM subscriptions for all manufacturers is not possible for many shops. However, access to this software is required for certain modern vehicles and repairs, and...
Enhance your collision repair workflow with Autel’s IA900, a process-driven solution integrating precision alignment, bi-directional diagnostics, and ADAS calibration. Designed...
Voice Your Opinion!
To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!
