TSBs

Fixing noisy Jeep steering column

April 15, 2025

This bulletin applies to 2020-2021 Jeep Wrangler and Gladiator vehicles built on or after July 15, 2020, and on or before March 2, 2021.

Mike Mavrigian

Related To:

Mitchell 1

If the noise is coming from the energy absorbing slip joint area of the lower shaft, replace the steering column assembly.

This bulletin applies to 2020-2021 Jeep Wrangler and Gladiator vehicles built on or after July 15, 2020, and on or before March 2, 2021.

A noise may be coming from the tailshaft of the steering column while turning. Use a stethoscope or chassis ears to listen to the lower steering shaft near the energy absorbing slip joint, on the interior side, near the front bulkhead, while the steering wheel is turned.

If the noise is coming from the energy absorbing slip joint area of the lower shaft, replace the steering column assembly.

About the Author

Mike Mavrigian | Motor Age Editor

Mike Mavrigian has written thousands of automotive technical magazine articles involving a variety of specialties, from engine building to wheel alignment, and has authored more than a dozen books that crisscross the automotive spectrum. Mike operates Birchwood Automotive, an Ohio shop that builds custom engines and performs vintage vehicle restorations. The shop also features a professional photo studio to document projects and to create images for articles and books.