The PL600 is designed for shops performing flashing/reprogramming
The PL6100 is designed as a charger for all automotive servicing needs
The PL6100 is manufactured with robust construction and convenience features
Features and benefits
Delivers up to 100A to maintain system voltage during reprogramming events
Features very low voltage ripple for clean power delivery
Features rapid load response for quick recovery from load increases
Allows voltage control from 13.1-14.9V, in 0.1V increments
Fully automatic operation
60/40/10A charge rates handle everything from small batteries to Group 31 batteries
Specific charging routines for flooded, AGM, spiral wound, deep cycle, and marine batteries
Able to manage completely dead batteries
Sturdy steel frame stands up to harsh shop environments
Detachable input and output cords
Extra-long 13’ output cables reach the starting points on vehicles
Heavy duty PowerJaw clamps provide power transfer and are angled for improved access
Easy-to-use interface with smart display feedback
Application
The PL6100 is a flashing power supply for shops; its clean power delivery provides support for reflashing events, and its adjustability allows it to meet OE voltage requirements. It provides comprehensive charging capabilities, enabling coverage for two applications: flashing power supply and heavy duty battery charging.
Origin
The PL6100 was developed to address the market need for a versatile, precise, high amperage power supply that can meet OE voltage requirements. The PL6100 also incorporates advanced battery charging capabilities.
Manufacturing specs
The PL6100 is ETL-approved to meet the UL1236 Battery Charging standard, as well as all FCC requirements for high frequency devices, according to the company. It features heavy duty steel construction and extra-long #2 AWG output cables. It delivers a power supply with voltage ripple greater than 100mV, as well as Rapid Load Response Technology.
Storage and display
The PL6100 is shipped as a single unit, double boxed for added protection. Clore Automotive suggests storing the PL6100 on the top of a toolbox or on a prominent shelf.
The Clore Automotive SOLAR Pro-Logix 12V 100A Flashing Power Supply and 60/40/10A Battery Charger, No. PL6100, is designed to provide stable power on-demand, up to 100A, to a vehicle electrical system to support module reprogramming. It also provides full-service battery charging capability from 10A to 60A, to service everything from small vehicle batteries to Group 31 batteries. In power supply mode, it features a voltage output range of 13.1-14.9V, adjustable in 0.1V increments, allowing the operator to dial the output in exactly as specified by the supplier of the vehicle under service. In charging mode, it features over-voltage protection, reverse polarity protection, smart clamp technology, and battery fault detection.
Learn how to properly lubricate your AIRCAT air tools to keep them running at peak performance. Discover essential daily maintenance and storage techniques, along with the right...
