In Focus: SP Air Short Reciprocating Air Saw, No. SP-7620

April 1, 2021
The SP-7620 has a direct drive motor that turns a gear for a powerful cut.
Sp 7620 Blue 604012db2d44b

The SP Air Short Reciprocating Air Saw, No. SP-7620, is lightweight and features a small body style for greater access to tight work places. It is able to cut steel, sheet metal, fiberglass, FRP, rubber, resins, and bumpers. The SP-7620 has a direct drive motor that turns a gear for a powerful cut and has a graduated trigger for ease of control. It also features an ergonomic design with a cushion grip handle, safety throttle lever, and a built-in power regulator. The SP-7620 has an overall length of 6.1” and weighs 1 lb.

Application 

The SP Air Shot Reciprocating Air Saw works well for cutting off quarter panels, as well as cutting through fiberglass or rubber.

Features and benefits 

  • The saw is motor driven with a powerful stroke, unlike the piston driven types, says the company. 
  • Able to cut through HTSS, FRP, rubber, resins, and bumpers. 

Selling points

  • The saw runs at 7,500 strokes per minute.
  • The small body enables technicians to work in tight areas.
  • The universal saw blade available from SP Air or any hardware store.

 Origin

SP Air had requests to make a smaller hand-held gear-driven saw. Their SP-7610 is about 2” longer than the new SP-7620.

Manufacturing/engineering specifications 

The SP-7620 runs at 7,500 strokes per minute with a 0.24” stroke. Its overall length is 6.1” and it weighs 1.0 lb.

Storage and display

The SP-7620 comes in a box with the parts broken down. The company suggests that an air chuck be used on the tool to allow it to be displayed with other air tools on the truck.

Suggested retail price 

$280

For more information

Contact [email protected]

Sponsored Recommendations

Tesla service, repair, and diagnostics

Keep update-to-date on how to maintain your customer's Tesla vehicles.

Tool Review: Ascot Supply 3/4" Drive 600 ft-lbs Split Beam Torque Wrench, No. 168-00600

Reviewed by Eric Moore, manager at DeMary Truck in Columbus, Ohio.

Diagnosing an engine misfire

Recognizing a misfire is the easy part; the challenge is determining its cause.

The ‘Iron Giant’

This technician spent two and half years putting together his ‘giant’ of a toolbox setup.

Voice Your Opinion!

To join the conversation, and become an exclusive member of Vehicle Service Pros, create an account today!