VIDEO: IPA Tools 9008-DL Super MUTT Trailer Tester Pro Edition Manual (with Spanish subtitles)

The following video guides users through implementation of the Super Mutt Trailer Tester Pro, a diagnostic and remote controlled trailer, lighting and air brake testing platform, in a shop. 

The Super MUTT Trailer Tester Pro Edition, No. 9008-DL is ideal for both on and off-site commercial trailer testing and repairs. 

ELECTRICAL TESTING (12/24 Volt Operation)

• Power lights: Manually, All-On, Auto Scan, or by Remote Control
• Audible and visual alerts: cross, open, overloaded and short circuit indication
• Pulsar mode allows diagnostic repair
• Advanced trailer wiring diagnostics
• Amperage readout and range (0-20 amps)
• Cable testing
• Ground failure detection: differentiates between wire and chassis ground

ABS TESTING

• Access ABS blink codes
• Test ABS fault blink codes via Auxiliary and Brake Circuit activation (i.e. Meritor/Wabco, Bendix TABS-6 and Haldex systems)

AIR BRAKE TESTING

• Performs leak down test on service and emergency lines
• Remote control allows observation of slackers to measure and adjust pushrods
• Real time, repetitive brake activation to find developing problems and verify leaking servo cans
• Features an internal air regulator

REMOTE CONTROL

• Remotely test all trailer electric circuitry and air brake actuation with new 12-button remote
• Three-button remote controls test all trailer electric circuitry and air brake actuation, 200+ ft. range
• Sync multiple (12) remotes to one unit Also Included: New 12-Button Remote Control No. MUT-RM12
• Remotely test all trailer electric circuitry and air brake actuation with new 12-button remote
• 200+ ft. range
• 340mHz
• Uses battery type 23A (included)