The Electronic Specialties LOADpro Clear Dynamic Test Leads, No. 180CLR, features a clear housing that allows users to actually see the load and instantly load the circuit to ...
The Electronic Specialties 180VM LOADpro Dynamic Test Leads and Volt Meter allows users to instantly load a circuit to see if current can flow and was designed specifically...
The Electronic Specialties Pro Auto Test Lead Kit, No. ELS200, includes a full range of accessory test leads designed for automotive, heavy duty, and marine electrical troubleshooting...
The Electronic Specialties EV Insulation Tester, No. 550, is designed to check high-voltage circuits on electric and hybrid vehicles for voltage leaks to ground. It can supply...
The Electronic Specialties Super Relay Buddy Pro Kit, No. 195, includes the Super Relay Buddy tester, plus three different adapters to increase test coverage to ten different ...
The High Accuracy Low Current Clamp Meter, No. 683, from Electronic Specialties was developed with new circuitry designed to maximize low current accuracy and zero stability. ...
The Electronic Specialties Super Relay Buddy, No. 194, is designed to provide an indication of the general health and functioning of the most common 4/5 pin 12V relays. It cycles...
The Electronic Specialties Code Buddy Pro+, No. 904, is a code scanner that pulls/erases trouble codes and displays the live data stream. It reads hard, pending, and historic ...
The Electronic Specialties LOADpro and Back Probe Kit, No. 187, is designed to help technicians diagnose electrical problems. The kit includes LOADpro test leads, LOADpro tip ...
The Electronic Specialties Relay Fuse Buddy, No. 316, is a diagnostic tool that features an on/off relay bypass switch and live current meter. The tester will normally connect...
This video is a sample of the online training available with the Electronic Specialties Hands-On-Line Electrical Training Cards. This video offers training for Card 1A.
Watch a vide demonstration of Electronic Specialties 688 True RMS Low Current Clamp Meter, applied on a Ford Escape hybrid. Filmed with Jim Bates of Advance Auto Parts.
This video covers Electronic Specialties TMX-589 setup instructions and testing tips for diodes. This is one of 10 videos on the DVD included in the TMX-589 TECH METER KIT.
The Electronic Specialties Short Buddy helps you locate shorts to ground and deal with blowing fuses. Plus its a a great tool for finding intermittents, especially those caused...
ESI introduces the TMX 589 TECH METER kit. A Hybrid safe, CAT lll, IV waterproof meter that comes with LOADpro Voltmeter Leads, a copy of the 200-page Fundamental Electrical Troubleshoo...
Looking for some new diagnostic tools and equipment for the new year? Check out the most clicked-on diagnostic tools and updates on VehicleServicePros.com from the fourth quarter...
The PPTAMP and PPTPWM Adapters, Super Relay Buddy Pro Kit, and POWER MIG 211i MIG Welder are some of this month's most popular tools and equipment among auto repair techs.
Some popular products from this month's sneak peek include the Nitrous Key Making System, High Accuracy Low Current Clamp Meter, EV Battery Pack Leak Tester, and more.
Some popular products from this month's sneak peek include 6" Automatic Safety Wire Twisting Pliers, 17-pc Deep Metric Socket Set, Triple Square Bit Socket 10-pc Set, and more...
Looking to upgrade your shop's diagnostic equipment this year? Check out the most clicked on diagnostic tools on VehicleServicePros.com from the first quarter.
The Electronic Specialties Forehead IR Thermometer, No. DT-8806H, is an FDA approved device and is capable of safely measuring forehead temperatures. The product is designed specificall...
The Electronic Specialties 70-pc Diagnostic Test and Terminal Set, No. 846, is a comprehensive test kit that features a variety of terminal adapter sets, back probes, clips, and...
The Electronic Specialties Automotive Test Probe Kit, No. 805, features test leads with an extended length of 64". The kit also includes extra sharp test probes, and a set of ...
The Electronic Specialties 10-pc Back Probe Kit, No. 804, features an assortment of the company's back probes designed for diagnostic and electrical troubleshooting. Each probe...
The Electronic Specialties 16-pc Spade Terminal Test Set, No. 1351, is designed to fit seven different sizes of spade connectors. This allows taping of live readings with the ...
The Electronic Specialties Load Pro Test Leads, No. 180, load the circuit to see if current can flow. By loading the circuit Load Pro makes a voltage drop test "on the fly" the...
The Electronic Specialties 400 Amp DC/AC Auto-Ranging Clamp Meter is designed to measure a variety of currents and applications up to 400 amps, such as fuel pumps, electric motors...
The Electronic Specialties Code Buddy+ Code Reader, No. 901, is designed to work with all 1996 and later OBD-II/CAN compliant vehicles. This code reader features multi-lingual...
The Electronic Specialties 54-pc Universal Test Connector Kit, No. 149, features 26 different connectors for wide testing coverage. This test kit enables connection to most...
The Electronic Specialties Wire Piercing Test Clips, No. 619, are designed to save time when the testing application requires tapping of live electrical readings. They are designed...
The Electronic Specialties 10' Test Leads with Screw-off Alligator Clips, No. 629, is designed to save time and increase productivity. These test leads feature an extended length...
The Electronic Specialties 14 Pc. Deutsch Test Connector Kit, No. 148, features a selection of terminal adapter sets specifically fitted for diagnostic testing and connections...
The Electronic Specialties Fuse Buddy Mini Kit, No. 309A offers testing capabilities for all three major fused circuits. The tester can measure as high as 30A or as low as 100...
The Electronic Specialties Non-Contact Infrared Thermometer with Laser, No. EST-45, measures surface temperatures, up to 932 degrees F or 500 degrees C. The instrument features...
The Electronic Specialties Small Engine Tach/Hour Meter, No. 329, is a multi-function instrument capable of displaying stable/unstable engine RPM readings up to 20,000 as well...
The Electronic Specialties CATIII Automotive Test Lead Set, No. 635, includes a basic assortment of accessory test leads which are in compliance with the IEC safety rating of ...
The Electronic Specialties Hands On-Line Electrical Training Cards, No. 186, offer technicians a way to learn electrical troubleshooting through a hands-on training system where...
The Electronic Specialties Deluxe DMM, No. 582, uses amp shutters to block unused test lead jacks as well as prevent mistake operation, reduce blown fuses and improve user safety...
The Electronic Specialties Starter Buddy, No. 165, speeds up the starting/cranking diagnostic procedure and finds high resistance in the circuit. This product performs a live ...
The Electronic Specialties Diagnostic Relay Buddy 12/24 Pro Test Kit, No. 193, includes five relay adapters, the Diagnostic Relay Buddy 12/24 tester and a blow mold case. Three...
The Electronic Specialties Diagnostic Relay Buddy 12/24, No. 192, tests relays from 12V automotive vehicles, 24V electrical systems in heavy duty vehicles and 24V battery-powered...
The Electronic Specialties Digital Battery & Electrical System Analyzer w/Printer, No. 726, performs a complete starting and charging system analysis along with a diagnosis of...
The Electronic Specialties 54-pc Automotive Test Connector Kit, No. 146, features a variety of terminal adapter sets, which enable connection to most automotive vehicle connectors...
The Electronic Specialties Mini Back Probes/Wire Piercers, No. 618, are designed to save time and increase productivity by making some of the more difficult testing connections...
The Electronic Specialties Self-Calibrating True RMS Digital Multimeter, No. 485, features a patented self-calibration function. Once the self-calibration function is turned on...
The Electronic Specialties Test Leads with Screw-off Alligator Clips, No. 629, are designed to work with most DMM’s currently in use. Connection to the multimeter is made via ...
The Electronic Specialties Heavy Duty Insulation Piercing Test Clips, No. 142-3, are sold as a set of two probes and are designed to work with most DMM/Scope test lead kits currently...
The Electronic Specialties True RMS Low Current Clamp Meter, No. 688, features a 3/4" clamp opening, which allows clamping over heavy duty ground cables and some multiple ground...
The Electronic Specialties Code Buddy PRO, No. 903, works with all 1996 and later OBDII/CAN-compliant vehicles. This compact and easy-to-use code scanner with live data and diagnostic...
Electronic Specialties' Shielded Relay Adapter Kit, No. 190-4, includes three relay adapters for use with 190 Relay Buddy tester. These three adapters permit testing of shielded...
The Electronic Specialties Battery Starting/Charging System Analyzer, No. 725, can test critical electrical components on a vehicle. Using its positive and negative clamps, simply...
The Relay Adapter Kit, No. 190-5, from Electronic Specialties includes two relay adapters for use with 190 Relay Buddy tester. These two adapters permit testing of two new relay...
Electronic Specialties' Relay Buddy Pro Test Kit, No. 191, includes five newly developed relay adapters and a tester, in a blowmold case. Three of the adapters make possible testing...
"When measuring voltages on hybrid vehicles, always use a DMM with minimum safety rating of CATIII 1000V," according to Steve White, president of Electronic Specialties. "In addition...
The Electronic Specialties Fuse Lead (No. 134) is a standard test lead set, but with the added feature of the ATO fuse holder. This unit helps prevent a digital multimeter's internal...
Electronic Specialties' Insulation Tester, No. 550, can supply 250, 500 and 1000V test voltages for complete insulation testing on Hybrid-electric vehicles. It has a large dual...
The Electronic Specialties Tech Meter Kit, No. TMX-589, is a true RMS auto-ranging DMM designed for all aspects of electrical troubleshooting. The TMX-589 features True RMS accuracy...
Electronic Specialties offers the Premium Automotive Meter, No. 597, an auto-ranging DMM designed for advanced automotive troubleshooting. The DMM is CAT III 1000V- and CAT IV...
The Electronic Specialties Short Buddy (No. 230) is designed to help find shorts and intermittent electrical issues. This troubleshooter uses audible tones, allowing a tech to...
Electronic Specialties introduces the No. 190 Relay Buddy Automotive Relay Tester to provide an indication of the general health and function for most common 4/5 pin automotive...
Electronic Specialties introduces the No. 143 Automotive Test Lead Kit. This kit features quality test leads with an extended length of 64". Each accessory test probe connects...
The Electronic Specialties' Code Buddy +PLUS (No. 902) works with all 1996 and later OBD II/CAN-compliant vehicles. The 902 displays the full live data stream, giving valuable...
Electronic Specialties' LOADpro Dynamic Test Leads, No. 180, allow users to instantly load the circuit to see if current can flow. LOADpro leads are designed specifically for ...
The Electronic Specialties Low Current Probe/DMM, No. 687, can measure down to .001A and up to 80A. It's ideal for all low current applications, especially for diagnosing parasitic...
LOADpro Dynamic Test Leads, No. 180, from Electronic Specialties Inc., allow you to instantly load the circuit to see if current can flow. This is the only OEM-approved tool that...
Electronic Specialties' LOADpro Dynamic Test Leads, No. 180, allow users to instantly load the circuit to see if current can flow. LOADpro leads are designed specifically for ...
Electronic Specialties' Laser Guided Infrared Thermometer, No. EST-35, features a dual display with simultaneous live temp reading and continuous MAX or MIN hold that allows the...
Electronic Specialties' Digital Tire Pressure Gauge, No. 162, is professional grade and gives accurate tire pressure readings and features an angled head, easy-grip housing, backlit...
Electronic Specialties' EZ-Tach +Plus Digital Tachometer, No. 328, is a wireless and inductive tachometer that gives easy RPM readings (from 0 RPM to 20,000 RPM) for setting idle...
Electronic Specialties' Digital Tach/Advance Timing Light, no. 125, is professional grade and measures ignition spark advance from 0 degrees to 90 degrees. High visibility LEDs...
The Electronic Specialties 500 Amp Carbon Pile Load Tester, No. 710, performs variable load testing on 12V batteries rated as high as 1,000 Cold Cranking Amps. The No. 710 features...
Electronic Specialties developed the Model 315 80-amp Max Fuse Buddy Kit, designed to measure the higher amp draws through Maxi fused circuits. During testing, the circuit being...
The 590TRMS True RMS Automotive DMM from Electronic Specialties has 15 testing functions, including Ms-Pulse Width, for testing the on-time of fuel injectors, along with testing...
The full-color 2010 Electronic Specialties' product catalog contains information on features, capabilities and test ranges. The catalog update includes a five new products.
The Electronic Specialties 30-amp Model 310 Max Fuse Buddy Pro Test Kit can measure up to 80 amps through Maxi fuse circuits and covers both mini and ATC fuse sizes, with a third...
Electronic Specialties offers their Deluxe Automotive Meter, No. 585K. The No. 585K now includes a storage case for safe-keeping of the meter and all accessories. The No. 585K...
This 16-page, full-color 2009 catalog from Electronic Specialties contains information on features, capabilities and test ranges including 13 new products.
The Electronic Specialties Code Buddy, No. 901, can read and clear generic and manufacturer specific diagnostic trouble codes and pending codes. This scan tool is CAN-compatible...
The #710 by Electronic Specialists performs variable load testing on 12 volt batteries rated as high as 1000 Cold Cranking Amps. The #710 features large dual meters to display...