This bulletin applies to BMW vehicles equipped with TRSVC01 control unit installed and the optional equipment OE03AG – reversing assist camera (2020 430i as an example).
After programming, the rearview camera displayed image may have changed. The change is identifiable by the top and bottom corners of the rear view camera which are now visible in the screen image. No corrective measures are needed.
The angle of view for the rearview camera was enhanced. Due to the field of view being expanded, side obstacles can now be better identified. However, with the expanded field of view, the top and bottom corners of the camera can be seen in the image.
This expanded field of view was introduced with the integration level F020-18-07-5xx.